Motor (OpenSpirit v2.9.0 Build 27

Intro

Overview

Model

Table

OpenSpirit v2.9.0 Build 27 - Generic Model

SUMMARY: INHERITED | COLUMNS

DETAIL: COLUMNS

EpiDrilling_Motor

Derived From:: EpEntity_Entity, EpiDrilling_TubularComponent

Capabilties:: read

A positive Displacement Motor used for drilling.

Column Summary

Type Name and Description

Stringro

KeyString

Unique identifier for each table entry.

Double
db

BendSettingsMax

Maximum bend angle setting

String
db

BendSettingsMaxUnit

The acronym of the unit that the BendSettingsMax column is returned in

Double
db

BendSettingsMin

Min.

String
db

BendSettingsMinUnit

The acronym of the unit that the BendSettingsMin column is returned in

Double
db

ClearanceBearBox

Clearance inside bearing box

String
db

ClearanceBearBoxUnit

The acronym of the unit that the ClearanceBearBox column is returned in

Double
db

DiaNozzle

Nozzle diameter.

String
db

DiaNozzleUnit

The acronym of the unit that the DiaNozzle column is returned in

Double
db

DiaRotorNozzle

Diameter of rotor at nozzle.

String
db

DiaRotorNozzleUnit

The acronym of the unit that the DiaRotorNozzle column is returned in

Boolean
db

DumpValve

Indicates if the dump valve is present through true or false.

Double
db

FlowrateMax

Maximum flow rate.

String
db

FlowrateMaxUnit

The acronym of the unit that the FlowrateMax column is returned in

Double
db

FlowrateMin

Minimum flow rate.

String
db

FlowrateMinUnit

The acronym of the unit that the FlowrateMn column is returned in

ULong
db

LobesRotor

Number of rotor lobes.

ULong
db

LobesStator

Number of stator lobes

Double
db

OffsetTool

Tool offset from bottom

String
db

OffsetToolUnit

The acronym of the unit that the OffsetTool column is returned in

Double
db

PresLossFact

Pressure loss factor.

Boolean
db

Rotatable

Indicates if the motor rotatable or not.

Boolean
db

RotorCatcher

Indicates if the rotor catcher is present through true or false.

Double
db

TempOperMax

Maximum operating temperature

String
db

TempOperMaxUnit

The acronym of the unit that the TempOperMax column is returned in

String
db

TypeBearing

Oil Seal, Mud Lube.

Columns inherited from EpiDrilling_TubularComponent

AxialStiffness, BendStiffness, BurstPressure, BurstPressureUnit, Capacity, CapacityUnit, CfgConn, Classification, CollapsePressure, CollapsePressureUnit, Comment, ConnCriticalCrossSection, ConnCriticalCrossSectionUnit, ConnInnerDiameter, ConnInnerDiameterUnit, ConnLength, ConnLengthUnit, ConnOutsideDiameter, ConnOutsideDiameterUnit, ConnPosition, ConnPresLeak, ConnPresLeakUnit, ConnSizeThread, ConnSizeThreadUnit, ConnTqMakeup, ConnTqMakeupUnit, ConnTqYield, ConnTqYieldUnit, ConnType, ConnTypeThread, ConnYieldStress, ConnYieldStressUnit, Cost, CostUnit, Description, Displacement, DisplacementUnit, DoglegMx, DoglegMxUnit, DriftDiameter, DriftDiameterUnit, FishneckInnerDiameter, FishneckInnerDiameterUnit, FishneckLength, FishneckLengthUnit, FishneckOuterDiameter, FishneckOuterDiameterUnit, Grade, InnerDiameter, InnerDiameterUnit, JointAverageLength, JointAverageLengthUnit, KeyString, Length, LengthUnit, Material, MaxOutsideDiameter, MaxOutsideDiameterUnit, MdBottom, MdBottomUnit, MdTop, MdTopUnit, ModelNumber, Name, NominalInnerDiameter, NominalOuterDiameter, NominalWeightPerlength, NumberJointStand, OuterDiameter, OuterDiameterUnit, PipeClass, Project, ProjectName, SequenceId, SerialNumber, StoreInstallationName, StoreType, StressFatig, StressFatigUnit, TensionYield, TensionYieldUnit, TorsionalStiffness, TourqueYield, TourqueYieldUnit, Tubular, Type, WallThickness, WallThicknessUnit, WearWall, WeightPerLen, WeightPerLenUnit, YieldStress, YieldStressUnit

Columns inherited from EpEntity_Entity

LastModifiedDate, Name, Project, ProjectName, StoreInstallationName, StoreType

Column Detail

KeyString

`Data Type:`	String
`Read only:`	true

Unique identifier for each table entry.

ClearanceBearBoxUnit

`Data Type:`	String
`Content Type:`	UnitAcronym
`Read only:`	false
`Required for Insert:`	false
`Stored in db:`	true
`Part of natural key:`	false
`Unit Measure:`	Length

The acronym of the unit that the ClearanceBearBox column is returned in

PresLossFact

`Data Type:`	Double
`Read only:`	false
`Required for Insert:`	false
`Stored in db:`	true
`Part of natural key:`	false

Pressure loss factor.

DumpValve

`Data Type:`	Boolean
`Read only:`	false
`Required for Insert:`	false
`Stored in db:`	true
`Part of natural key:`	false

Indicates if the dump valve is present through true or false.

DiaRotorNozzleUnit

`Data Type:`	String
`Content Type:`	UnitAcronym
`Read only:`	false
`Required for Insert:`	false
`Stored in db:`	true
`Part of natural key:`	false
`Unit Measure:`	CylinderDiameter

The acronym of the unit that the DiaRotorNozzle column is returned in

ClearanceBearBox

`Data Type:`	Double
`Read only:`	false
`Required for Insert:`	false
`Stored in db:`	true
`Part of natural key:`	false
`Unit Measure:`	Length

Clearance inside bearing box

FlowrateMaxUnit

`Data Type:`	String
`Content Type:`	UnitAcronym
`Read only:`	false
`Required for Insert:`	false
`Stored in db:`	true
`Part of natural key:`	false
`Unit Measure:`	Flowrate

The acronym of the unit that the FlowrateMax column is returned in

DiaRotorNozzle

`Data Type:`	Double
`Read only:`	false
`Required for Insert:`	false
`Stored in db:`	true
`Part of natural key:`	false
`Unit Measure:`	CylinderDiameter

Diameter of rotor at nozzle.

FlowrateMax

`Data Type:`	Double
`Read only:`	false
`Required for Insert:`	false
`Stored in db:`	true
`Part of natural key:`	false
`Unit Measure:`	Flowrate

Maximum flow rate.

OffsetToolUnit

`Data Type:`	String
`Content Type:`	UnitAcronym
`Read only:`	false
`Required for Insert:`	false
`Stored in db:`	true
`Part of natural key:`	false
`Unit Measure:`	Length

The acronym of the unit that the OffsetTool column is returned in

RotorCatcher

`Data Type:`	Boolean
`Read only:`	false
`Required for Insert:`	false
`Stored in db:`	true
`Part of natural key:`	false

Indicates if the rotor catcher is present through true or false.

LobesRotor

`Data Type:`	ULong
`Read only:`	false
`Required for Insert:`	false
`Stored in db:`	true
`Part of natural key:`	false

Number of rotor lobes.

BendSettingsMaxUnit

`Data Type:`	String
`Content Type:`	UnitAcronym
`Read only:`	false
`Required for Insert:`	false
`Stored in db:`	true
`Part of natural key:`	false
`Unit Measure:`	PlaneAngle

The acronym of the unit that the BendSettingsMax column is returned in

OffsetTool

`Data Type:`	Double
`Read only:`	false
`Required for Insert:`	false
`Stored in db:`	true
`Part of natural key:`	false
`Unit Measure:`	Length

Tool offset from bottom

BendSettingsMax

`Data Type:`	Double
`Read only:`	false
`Required for Insert:`	false
`Stored in db:`	true
`Part of natural key:`	false
`Unit Measure:`	PlaneAngle

Maximum bend angle setting

FlowrateMinUnit

`Data Type:`	String
`Content Type:`	UnitAcronym
`Read only:`	false
`Required for Insert:`	false
`Stored in db:`	true
`Part of natural key:`	false
`Unit Measure:`	Flowrate

The acronym of the unit that the FlowrateMn column is returned in

TempOperMaxUnit

`Data Type:`	String
`Content Type:`	UnitAcronym
`Read only:`	false
`Required for Insert:`	false
`Stored in db:`	true
`Part of natural key:`	false
`Unit Measure:`	Temperature

The acronym of the unit that the TempOperMax column is returned in

FlowrateMin

`Data Type:`	Double
`Read only:`	false
`Required for Insert:`	false
`Stored in db:`	true
`Part of natural key:`	false
`Unit Measure:`	Flowrate

Minimum flow rate.

TempOperMax

`Data Type:`	Double
`Read only:`	false
`Required for Insert:`	false
`Stored in db:`	true
`Part of natural key:`	false
`Unit Measure:`	Temperature

Maximum operating temperature

BendSettingsMinUnit

`Data Type:`	String
`Content Type:`	UnitAcronym
`Read only:`	false
`Required for Insert:`	false
`Stored in db:`	true
`Part of natural key:`	false
`Unit Measure:`	PlaneAngle

The acronym of the unit that the BendSettingsMin column is returned in

DiaNozzleUnit

`Data Type:`	String
`Content Type:`	UnitAcronym
`Read only:`	false
`Required for Insert:`	false
`Stored in db:`	true
`Part of natural key:`	false
`Unit Measure:`	CylinderDiameter

The acronym of the unit that the DiaNozzle column is returned in

BendSettingsMin

`Data Type:`	Double
`Read only:`	false
`Required for Insert:`	false
`Stored in db:`	true
`Part of natural key:`	false
`Unit Measure:`	PlaneAngle

Min. bend angle setting.

DiaNozzle

`Data Type:`	Double
`Read only:`	false
`Required for Insert:`	false
`Stored in db:`	true
`Part of natural key:`	false
`Unit Measure:`	CylinderDiameter

Nozzle diameter.

TypeBearing

`Data Type:`	String
`Read only:`	false
`Required for Insert:`	false
`Stored in db:`	true
`Part of natural key:`	false

Oil Seal, Mud Lube.

Rotatable

`Data Type:`	Boolean
`Read only:`	false
`Required for Insert:`	false
`Stored in db:`	true
`Part of natural key:`	false

Indicates if the motor rotatable or not.

LobesStator

`Data Type:`	ULong
`Read only:`	false
`Required for Insert:`	false
`Stored in db:`	true
`Part of natural key:`	false